Comparative evaluation of the performance of thin diodes used as on-line dosimeters in radiation processing applications
DOI:
https://doi.org/10.15392/bjrs.v9i1A.1327Resumen
In this work, we report a comparison between the performance of two samples of commercial PIN photodiodes (SFH206K from Osram and S2506-04 from Hamamatsu) mainly addressing the variation of their current sensitivities with accumulated dose ranging from 0-15 kGy. All the results so far obtained have revealed that the radiation induced currents are linearly dependent on dose rates from 3.65 to 55.64 Gy/h. The current sensitivity of both unirradiated diodes (0.178 nA.h/Gy.mm3) slightly decreases with accumulated dose, namely 0.32%/kGy (SFH206K) and 1.4%/kGy (S2506-04). Although the SFH206K device compares favorably with the S2506-04, both diodes can be considered as a low budge alternative, good enough for on-line dosimetry applications in the field of radiation processing.
Descargas
Referencias
DIXON, R. L.; EKSTRAND, K. E. Silicon diode dosimetry. Int J Appl Radiat Isot, v. 33, p. 1171-1176, 1982.
RIKNER, G.; GRUSSEL, E. General specifications for silicon semiconductors for use in radiation dosimetry. Phys Biol, v. 32(9), p. 1109-1117, 1987.
SAINI, A. S.; ZHU, T. C. Dose rate and SDD dependence of commercially available diode detectors. Med Phys, v. 31(4), p. 914-924, 2004. http://doi.org/10.1118/1.1650563.
CASATI, M.; BRUZZI, M.; BUCCIOLINI, M.; MENICHELLI, D.; SCARINGELLA, M.; PIEMONTE, C.; FRETWURST, E. Characterization of standard and oxygenated float zone Si diodes under radiotherapy beams. Nucl Instrum Methods A, v. 552, p.158-162, 2005. http://doi.org/10.1016/j.nima.2005.06.025.
GRIESSBACH, I.; LAPP, M.; BOHSUNG, J.; GADEMANN, G.; HARDER, D. Dosimetric characteristics of a new unshielded silicon diode and its application in clinical photon and electron beams. Med Phys, v. 32(12), p. 3750-3754, 2005. http://doi.org/10.1118/1.2124547.
BRUZZI, M.; BUCCIOLINI, M.; CASATI, M.; MENICHELLI, D.; TALAMONTI, C.; PIEMONTE, C.; SVENSSON, B. G. Epitaxial silicon devices for dosimetry applications. Appl Phys Lett, v. 90, p. 172109, 2007. http://doi.org/10.1063/1.2723075.
GONÇALVES, J. A. C.; PEREIRA, L. N.; POTIENS, M. P. A.; VIVOLO, V.; BUENO, C. C. Evaluation of epitaxial silicon diodes as dosimeters in X-ray mammography. Radiat Meas, v. 71, p. 384-388, 2014. http://doi.org/10.1016/j.radmeas.2014.07.014.
SANTOS, T. C.; NEVES-JUNIOR, W. F. P.; GONÇALVES, J. A. C.; HADDAD, C. M. K.; HARKONEN, J.; BUENO, C. C. Characterization of miniature rad hard silicon diodes as dosimeters for small fields of photon beams used in radiotherapy. Radiat Meas, v. 71, p. 396-401, 2014. http://doi.org/10.1016/j.radmeas.2014.08.002.
NASCIMENTO, C. R.; ASFORA, V. K.; GONÇALVES, J. A. C.; KHOURY, H. J.; BARROS, V. S. M.; KALIL, L. F.; BUENO, C. C. The performance of a multi guard ring (MGR) diode for clinical electron beams dosimetry. Appl Radiat Isot, v. 141, p. 112-117, 2018. http://doi.org/10.1016/j.apradiso.2018.07.002.
GONÇALVES, J. A. C.; MANGIAROTTI, A.; BUENO, C. C. Current response stability of a commercial PIN photodiode for low dose radiation processing applications. Rad Phys Chem, v. 167, p. 108276-9, 2020. https://doi.org/10.1016/j.radphyschem.2019.04.026.
ISO - International Standardization Organization. Standard Practice for Dosimetry in a Gamma Facility for Radiation Processing. ISO/ASTM 51702:2013(E), 3rd ed., 2013.
ISO - International Standardization Organization. Standard Practice for Dosimetry in Radiation Processing. ISO/ASTM 52628:2013(E), 1st ed., 2013.
OSVAY, M.; TÁRCZY, K. Measurement of -dose rates by n- and p-type semiconductor detectors. Phys Stat Sol, v. (A)27, p. 285-290, 1975.
Descargas
Publicado
Número
Sección
Licencia
Derechos de autor 2021 Brazilian Journal of Radiation Sciences (BJRS)
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
Licencia: los artículos de BJRS tienen una licencia internacional Creative Commons Attribution 4.0, que permite el uso, el intercambio, la adaptación, la distribución y la reproducción en cualquier medio o formato, siempre que se otorgue el crédito correspondiente al autor o autores originales y a la fuente, proporcione un enlace a la licencia Creative Commons e indique si se realizaron cambios. Las imágenes u otros materiales de terceros en el artículo están incluidos en la licencia Creative Commons del artículo, a menos que se indique lo contrario en una línea de crédito al material. Si el material no está incluido en la licencia Creative Commons del artículo y su uso previsto no está permitido por la regulación legal o excede el uso permitido, el autor deberá obtener el permiso directamente del titular de los derechos de autor. Para ver una copia de esta licencia, visite http://creativecommons.org/licenses/by/4.0/
