Thermal study of the modular high-temperature gas-cooled reactor
Keywords:
MHTGR, RELAP5-3D, Thermal AnalysisAbstract
The Modular High-Temperature Gas-Cooled Reactor (MHTGR) is an advanced power plant being a coupling between a modular helium cooled reactor and a gas turbine. The gas-cooled reactor types are of great interest due to their potential to provide high-temperature process heat in addition to their high thermal-to-electric power conversion efficiency and inherent safety features. The MHTGR is helium-cooled, graphite-moderated and uses Triso-coated fuel particles immersed in a cylindrical-shaped graphite matrix. The annular core and fuel blocks are based on the FSV (Fort Saint Vrain) reactor design. In this work, a MHTGR model developed in the RELAP5-3D code is presented, as well as its verification for steady state calculations. The core simulations have been performed to three power values: 350, 450 and 600 MWth. The heat transfer along the blocks was investigated taking into account the diversion flow. The radial power distribution within the compact fuel was assumed to be uniform for the analysis. Radial and axial normalized power factors were specified for each axial segment in the heat structures that are coupled to the thermal hydraulic channels that shape the reactor core. In the analyses, coolant and fuel temperatures, pressure drop and mass flow rate were verified at steady state conditions. The results were very close to the reference ones demonstrating that the developed model is capable to reproduce the MHTGR core in steady state operation.
Downloads
References
General Atomic, Gas Turbine-Modular Helium Reactor (GT-MHR) Conceptual Design Description Report. GA Project No. 7658. General Atomic, California, 1966.
TURNER, R. F. and NEYLAN, A. J., MHTGR Design and Development Status. GA PROJECT 7000, General Atomics, 1988.
YOON, S.J.et al. The Effects of Crossflow Gap and Axial Bypass Gap Distribution on the Flow Characteristics in Prismatic VHTR Core. Nuclear Engineering and Design, vol. 250, p. 465-479, 2012.
RAMOS, M. C. et al. Steady‐state thermal simulations of the liquid‐salt‐cooled high‐temperature reactor. International Journal of Energy Research, p. 1–10, 2017.
SCARI, M. E. et al., Thermal Hydraulic analysis and modeling of the HTTR using the RELAP5-3D. Journal of Nuclear Energy Science & Power Generation Technology, vol. 1, p. 1-6, 2017.
SCARI, M. E. et al., HTR steady state and transient thermal analyses. International Journal of Hydrogen Energy, vol. 41, p. 7192-7196, 2016.
INGERSOLL, D. T., Status of Physics and Safety Analyses for the Liquid-Salt-Cooled Very High-Temperature Reactor (LS-VHTR). ORNL/TM-2005/218. ORNL, Tennessee, 2005.
INGERSOLL, D. T., FORSBERG, C. W., MACDONALD, P. E., Trade Studies for the Liquid- Salt-Cooled Very High Temperature Reactor: Fiscal Year 2006 Progress Report. ORNL/TM-2006/140. ORNL, Tennessee, 2007.
U. S. DOE. Preliminary safety information document for the standard MHTGR. DOE/HTGR 86-024 Vol. 1. United States Department of Energy, 1986.
ORTENSI, J. et al., 2013 Prismatic Coupled Neutronics/Thermal Fluids Transient Benchmark of the MHTGR-350 MW Core Design: Benchmark Definition, OECD Nuclear Energy Agency, NEA/NSC/DOC DRAFT, 2013.
Published
Issue
Section
License
Copyright (c) 2022 Brazilian Journal of Radiation Sciences
This work is licensed under a Creative Commons Attribution 4.0 International License.
Licensing: The BJRS articles are licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
